The MKAL of Ice and Fire- Clue #4 Tutorial

Hi everyone!

As promised, I've put together a little tutorial for separating the back from the front on your Mystery KAL project. I will encourage you all once again, as I did on the Ravelry thread, to follow the directions step by step and very literally. I would even go as far as to say you may not want to read through them all the way for this section..just do it! If you over-think it too much, it will become more confusing than it's worth.

That said, many people are visual learners. Sometimes, with more complicated directions like this, there is just no "right way" to explain it, regardless of how carefully you edit your directions. However, I do apologize for some of the silly mistakes that I made in my sleep deprived state. I should have been more careful with the directions for this post and I am sorry for all of the confusion. The directions in Clue #4 should be fully updated now, and much clearer than what I posted early on Sunday. (Some people said they are having issues getting the edited version. If this is the case, remember to refresh your browser or clear your cache as your computer may be storing old versions of the post.)

Ok, so on to the tutorial for dividing the back from the front. This starts AFTER you have placed the side stitch markers. Please forgive my ugly orange yarn. At least you can see the sts really well! :)

Also, you may have noticed that for this tutorial I didn't use the full 120 sts. If you follow these directions as written, you should still have the 64 sts on front and 66 sts on back.


Separating the front from the back:

-Remove beginning of round marker and cut yarn leaving at least a 6" tail.



-Working from the beginning of the round, slip stitches from left to right needle to 2 sts before the first side marker. 



-Rejoin yarn, K1 f&b (5 times), slipping marker when you come to it. (You should have 2 increases on the right side of the marker and 3 on the left side.)


5 increases: 2 on right, 3 on left of marker

-Knit to 3 sts before the next marker.


-K1 f&b (5 times), slipping marker when you come to it. (You should have 3 increases on the right side of the marker and 2 on the left side.)

2 increases left, 3 increases right

-K to 4 sts before the next marker.

-Knit next st with main needle, slip 2nd st onto extra needle holding towards the inside of your work (or you can use a darning needle to thread in your waste yarn).

-Continue working the next 8 stitches in this manner, knit one with main needle, slip one on extra needle or waste yarn. Remove stitch marker when you come to it.

I left the stitch marker on for reference.

-You will have knit 5 sts on main needle, and slipped 5 onto extra circular or waste yarn. (As shown in picture above.)

-Leaving main needle for a minute, use extra circular needle or waste yarn to slip all stitches up to 5 sts before the next marker onto the holder or waste yarn.


-Slip next stitch with extra double point needle (DPN) or cable needle and hold to front, slip next stitch onto circular needle or waste yarn held in back.

-Continue slipping 1 stitch onto DPN or cable needle, and the next stitch onto extra circular or waste yarn until you have 5 sts on the DPN or cable needle. Remove stitch marker when you come to it.

I left the stitch marker in pic for reference.
 -You should now have 66 sts (this is the back) on extra circular or waste yarn with 5 sts on either end that overlap with 5 sts on the front section. The back section's sts will be on the inside while the front is on the outside.



-Slip stitches from DPN or cable needle onto right side end of main circular needle.



-You should now have 64 sts on main/front needle, this is the front.


Front is also where the beginning of the
round used to be.

I hope these pictures help to show you what these steps should look like. If I didn't include a photo for a step, it was because the step above or below basically illustrated it, or I couldn't get a decent shot of it. In any case, I think these should help those of you who are struggling with the separating part. Of course, please let me know if you have anymore issues.

If after doing this, you still are having problems with the stitch count and are getting 66 on front and 64 on back, here is my advice:

1) Skip Rows 1-6 of the birds eye lace- these are just set up rows anyway to get your stitch count up to 66 sts. Just follow rows 7-10 of the birds eye lace and you will be fine.

-or-

2) You can decrease two sts on this row by purling 2 together twice in the middle section somewhere:

"Leaving the back sts on holder, work front panel as follows:

-Row 1: k 5, pm, p to last 5 sts, pm, k 5"

-or-

3) You can simply slip one stitch on either end of the needle onto your holder needle or waste yarn.

One last thing I just wanted to say. This was a really tough section. Not just to knit, but also for me to write. It's not so much that the actual knitting part is difficult, but it's just really tough to visualize and execute blindly. It was also a challenge to write it in a way that 600+ people will understand. I have to give all of you a ton of credit for sticking with it and staying positive. It's not easy, but you CAN do it. I think that is why a lot of you are here, not just to be part of a group celebrating a book series/ show that we all love, but also to learn a little something along the way. If it was too easy, you'd be bored, and if it was crazy hard, then no one would be here. 

Think of this one clue as the really tough uphill section just before you get to the top of the mountain peak. You are so close to the summit, and when you get there you are going to have the sweetest view, which makes it all worth it. At least after this you won't be out of breath and sore afterwards. Well, at least I hope not. :) I guess what I mean is that I don't want this section to discourage people from continuing on. Powering forth and struggling through the tough spots is how we get better at our craft. This discussion we've been having on Ravelry the past few days has been a huge learning opportunity for me as well. I thank you all for that opportunity and for being so thoughtful and patient with me in your discussion.

I really hope this helps you all! Please let me know if you have anymore questions, concerns, or issues with the pattern. I am here to help!

Happy knitting,
Kristen

you might also like

Tutorial

27 comments:

  1. Thanks for this little bit of extra for us newbies! Can't wait to get started :)

    ReplyDelete
  2. Thanks Kristen. I'm ok up to the part after the kfb 5 times at each marker. It then says 'K to 4 sts before the next marker' - does that mean you knit all the way around to the dark blue marker? I can only see 2 markers in the first few pics and then they change colour in the later pics so I am unsure as to which marker this part of the instructions is referring to.

    ReplyDelete
  3. Hi Kimbamel!

    Yes, you knit all the way around to 4 sts before the opposite marker, in the picture it's dark blue. Since there are only two markers, you can always assume that its the next marker you would come to when working in the round. I hope this helps!

    Kristen

    ReplyDelete
  4. The photos are a terrific help! Thanks for doing them.

    ReplyDelete
    Replies
    1. If this is the case, remember to refresh your browser or clear your cache as your computer may be storing old versions of the post. | drywall contractors White Settlement

      Delete
  5. Kristen,

    Do we K1, and then K f&b into the next 5 or do we just K1 f&b into 5 stitches? Meaning are we using 6 stitches total for the overlap stitches. I've done the 66/64 round 3 times and still cannot get it right. Even with the tutorial...help :)

    Heather

    ReplyDelete
  6. I read through your "fixes" on the last clue rewrite and I think I can make it, but if you do have the answer for above I'd appreciate it :). Have a great day and thanks!

    Heather

    ReplyDelete
  7. Hi Heather!

    If I understand your question correctly, you should just be doing k1f&b into 5 sts total. This gives you 5 extra sts.

    Think of it this way, you are creating 5 extra sts that you are then going to separate out and place on either the front or the holder/back needle, depending on which side of the work you are on.

    I hope this helps!
    Kristen

    ReplyDelete
  8. Thanks Kristen. I have followed your tutorial and tried 4 times but I still end up with 66 on the front needle and 64 on the back needle :-( I will just follow your advice and slip 2 from the front to the back.

    ReplyDelete
  9. Hi Kristin! I'm cruising along pretty well until we get to:
    Front Flap:
    Leaving the back sts resting on the extra circular needle or waste yarn, work front panel as follows:
    Set up row: k 5, pm, p to last 5 sts, pm, k 5
    The part i dont understand is knitting the setup row. My working yarn is on the last stitch on the right. Should it be at the first stitch on the left? Otherwise I would be joining in the round again to Knit 5, then purl . Since i'm only knitting the front, it's like the whole hat is squeezed in the middle and 1/2 the size.
    Do I turn my work and go back the other way to K5? I'm just confused. Thanks, Ken

    ReplyDelete
  10. Your blog post is a remarkable piece of insight. It's evident that your dedication to delivering valuable content shines through. Exploring your assessment guidance was an enlightening experience. Speaking of dedication, if anyone's seeking top-notch assistance with their academic tasks, they can count on the professionals at Assessment Help.

    ReplyDelete
  11. Inclusive leadership training begins with building awareness about unconscious biases and prejudices. Participants learn to recognize their own biases and understand how these biases can affect decision-making and interactions.

    ReplyDelete
  12. In today's rapidly evolving corporate landscape, fostering diversity, equity, and inclusion (DEI) isn't just a buzzword; it's a strategic imperative. Organizations worldwide are recognizing the immense benefits of a diverse workforce, both in terms of innovation and employee satisfaction. In this article, we will explore the significance of a Diversity Equity Inclusion Strategy and how it can transform workplaces into more equitable and inclusive environments.

    ReplyDelete
  13. Before formulating a DEI strategy, it’s crucial to assess the current state of your organization. Collect data on diversity metrics, conduct surveys, and hold focus groups to understand the experiences and perspectives of your employees.

    ReplyDelete
  14. I love "The MKAL of Ice and Fire" try our speacial edition uk flag jacket By fashion Leader Peter sign

    ReplyDelete
  15. Just Grab New collection & Getuk flag jacket Live Your life with your own style

    ReplyDelete
  16. As the MKAL of Ice and Fire continues to unfold, our Clue #4 tutorial serves as your guide through the intricacies of this mysterious knitting adventure. Whether you're knitting for the thrill of discovery or the joy of crafting, join us on this journey as we unravel the secrets behind Clue #4. Let the needles click, the yarn flow, and the story of ice and fire come to life in your hands.
    chapter 7 lawyer near me

    ReplyDelete
  17. Practitioners learn effective communication strategies to manage patient expectations. Training emphasizes the importance of clear communication to achieve desired outcomes.

    ReplyDelete
  18. I'm genuinely impressed by your comprehensive explanation of online learning classes. The advantages they offer with uncompromising quality are truly noteworthy. Your blog serves as a valuable resource for both students and parents, shedding light on the significance of online learning. I eagerly anticipate delving into more of your insightful blogs and will certainly recommend them to my fellow readers!

    ReplyDelete
  19. The "MKAL of Ice and Fire - Clue #4 Tutorial" is a crafting masterclass that combines mystery and creativity, guiding participants through each stitch with expert precision. It's a must-follow for knitting enthusiasts seeking to navigate the frosty landscapes of creativity. New York State Divorce Lawyers

    ReplyDelete
  20. It's like having a patient and talented friend guiding me through the pattern. Your passion for knitting and the enthusiasm you inject into your writing made the tutorial not only educational but also genuinely enjoyable.
    best seaport restaurants

    ReplyDelete
  21. The reviewer is seeking information about Jamal Edwards' YouTube ad, including its content, audience, and effectiveness. They want to know if the ad promotes a specific product or service, evokes memories of Edwards' early days, and effectively achieves its goals. The context of the ad, such as the year, campaign, and target audience, can also be helpful. The aim is to provide a nuanced and insightful review comment.
    attorneys fairfax va

    ReplyDelete
  22. For expert Garage door repair silver spring md, trust our skilled technicians for prompt and reliable service. Whether it's a malfunctioning opener, damaged springs, or issues with the tracks, we have the expertise to diagnose and fix the problem efficiently. Our team prioritizes customer satisfaction, providing cost-effective solutions without compromising on quality.

    We offer same-day repairs to ensure your garage door operates smoothly and safely. With years of experience serving the Silver Spring community, we take pride in our professionalism and attention to detail. Contact us for all your garage door repair needs, and let us restore the functionality of your garage door promptly.

    ReplyDelete
  23. "Impressed with the lash extensions calgary ! The salon I went to had a great ambiance, and the technician was super skilled. Loving my fluttery lashes – a perfect finishing touch to any look. 👀✨ #CalgaryGlam #LashPerfection"

    ReplyDelete
  24. The author is unable to provide a specific review comment about a "black-panther-wrap-inspo" without context. To create an engaging comment, they need specific details about the item, its source, and its inspirations. The author can then craft a personalized comment that highlights the specific aspects of the item that inspired them. For example, a stylish outfit seen on social media could be described as "fierce" with bold colors and patterns.
    real estate contract disputes


    ReplyDelete
  25. I want to make that one. Thanks for sharing that tutorial. indianapolis asphalt driveway

    ReplyDelete
  26. This tutorial outlines the process of separating the front from the back of a Mystery KAL project. It begins with removing the round marker and cutting yarn, then slips stitches from left to right needles until 2 stitches before the first side marker. Then, knit one front and back five times, slipping the marker when reached. Continue with increases, knit to 3 stitches before the next marker, and repeat the process. Finally, knit 5 stitches on the main needle and slip 5 stitches onto the extra circular needle or waste yarn. After completing this step, review the project to ensure the front and back sections are properly separated. If any difficulties arise, refer back to the tutorial or seek assistance from fellow knitters. Once completed, continue with the next steps of the Mystery KAL project. leyes de divorcio de nueva jersey distribución equitativa

    ReplyDelete

FancyTheme